Page 1
A. For ESCs which has built-in BEC, please refer to the below steps and picture 1 for connecting.
NOTE: When connect the ESC to TM-Progbox, It is no need to connect ESC to brushless motor.
Features: Turnigy Program Box is one of the easiest devices to program
parameters of SuperBrain ESC, AquaStar ESC and Fatboy 300A ESC. It also can
read logged flight data from SuperBrain ESC.
I
The ESC models which Program Box supports to use.
ESC
RC model
Fully program
Read data
Connecting diagram
SuperBrain ESC-20A
Airplane
Yes
Yes
Picture 1
SuperBrain ESC-40A
Airplane
Yes
Yes
Picture 1
SuperBrain ESC-45A
Airplane
Yes
Yes
Picture 1
SuperBrain ESC-60A
Airplane
Yes
Yes
Picture 1
SuperBrain ESC-80A
Airplane
Yes
Yes
Picture 1
SuperBrain ESC-100A
Airplane
Yes
Yes
Picture 2
AquaStar ESC-90A
Boat
Yes
No
Picture 1
AquaStar ESC-120A
Boat
Yes
No
Picture 1
AquaStar ESC-240A
Boat
Yes
No
Picture 2
Fatboy ESC-300A
Airplane
Yes
No
Picture 2
Fatboy ESC-300A II
Airplane
Yes
No
Picture 2
II
Correctly connect ESC to Program Box.
- connect ESC’s receiver lead to the left socket of program box at correct polarity
(brown wire to negative, red wire to positive, orange wire to signal);
- connect ESC to battery pack. If connection is right, Program Box would highlight and read ESC’s model.
Pay attention to the polarity
Program box
Battery
ESC
Picture 1
B. Connect HV ESC which does not have built-in BEC, please refer to the below steps and picture 2 for connecting.
- connect ESC’s receiver lead to the left socket of program box at correct polarity
(brown wire to negative, red wire to positive, orange wire to signal);
-connect the other lead (consisted of red and brown wires) of ESC to the right socket of program box at correct polarity
(red wire to positive, brown wire to negative);
- connect ESC to battery pack.
- Switch ‘ON’ the switch of ESC. If connection is right, Program Box would highlight and read ESC’s model.
Y cable
