Turnigy Accuel C150, Instruction Manual

Page: 5 / 19

4
CAUTION AND NOTES
This charger is ONLY suitable for charge rechargeable LiPo, LiFe, LiHV, NiCd, NiMH, Smart
and Pb batteries. Do not attempt to charge dry cells, charge other types of batteries may
cause fire or explosion.
Set up the Input Power Limit/Low Input VOLT Cutoff correctly in the USER SETTING of the
DC power supply.
Pay attention to the charger during use. Do not leave the charger unattended.
Never charge the dead or damaged batteries.
Do not attempt to charge a battery pack containing different types of batteries.
Do not use damaged cables.
Do not use the charger close by a flammable object. Use only in well-ventilated areas.
Only charge the rechargeable batteries that meet the product specifications of this charger.
DO NOT allow water, moisture or foreign objects into the charger.
DO NOT use in humid locations. Do not operate with wet hands.
DO NOT attempt to disassemble the charger.
DO NOT
use the charger on fleecy materials, such as carpets, blankets, beds and cushions.
DO NOT block the cooling fan and the air inlet.
Strongly recommend balancing Lithium packs. An unbalanced pack may damage during
discharging.
General default charging current is preset at 1C. Please read manual carefully of the battery
and setup the suitable current to charge the battery. Higher C charging/ discharge current may
damage the battery, even cause fire.