Turner Designs AquaFluor, Manual

Page: 21 / 23

Aqua Fluor
®
U
ser’s Manual
21
Appendix A: Specifications
Cuvette information
Cuvette type Size Usage Part No.
Methacrylate
plastic 10 mm Square
(height 44.5 mm)
Required for UV (< 400 nm),
works for all applications.
Do NOT use with solvents
(ie. Acetone)
7000-959
Polystyrene
Plastic 10 mm Square
(height 47.5 mm)
Preferred for Turbidity use, will
NOT work for UV.
Do NOT use with solvents
(ie. Acetone)
7000-957
Borosilicate
glass 12 x 75mm
Round
Required for Extracted
Chlorophyll where solvents are
used. Requires Adapter
PN 8000-932
10-029A
Minicells
–
Borosilicate
Glass
5 x 31mm Flat
bottom
For use with high concentration
samples. Requires Adapter
PN 8000-936 (200 µL capacity)
7000-950
Aqua Fluor
®
Size
1.75” x 3.5” x 7.25”
(4.45cm x 8.9cm x 18.4cm)
Weight 13.9oz (0.4kg)
Resolution 12 bits
LCD Display 2 x 16 characters
Case Meets IP 67 Standard; dustproof and waterproof
Temperature 41-104 °F; 5-40 °C
Detector Photodiode
Calibration Type Single-point and blank
Error message Low battery, High blank
Cuvette Type See below
Warm Up Time 5 seconds
Auto Power Off After 3 minutes of inactivity