background image

 

TBS-380 Mini-Fluorometer Operating Manual

 

14 

6  Warranty 

 

6.1 

Terms 

 
Turner BioSystems warrants the TBS-380 Mini Fluorometer and any accessories to be free from defects 
in materials and workmanship under normal use for a period of one year from the time of initial purchase 
under the following restrictions: 
 

 

The instrument and accessories must be installed, powered, and operated in compliance with the 
directions in this 

Operating Manual

 and the directions accompanying the accessories.  

 

Damage incurred during shipping is not covered by warranty.  

 

Damage resulting from measuring incompatible samples is not covered by warranty.  

 

Damage resulting from reagent spills is not covered by warranty.  

 

Damage resulting from contact with corrosive materials or atmosphere is not covered by warranty.  

 

Damage from salts, proteins and other moderately corrosive materials that are not promptly removed 
from the instrument are not covered by warranty. 

 

Damage caused by user modification of the instrument is not covered by warranty.  

 
6.2 

Warranty Service 

 
 

To obtain service during the warranty period, the owner shall take the following steps:  

 
1.  Write or call the Turner BioSystems Customer Service and describe as precisely as possible the 

nature of the problem.

 

 

2.  Carry out minor adjustments or tests as suggested by the Technical Support Department. 
 
3.  If proper the instrument is still not functioning properly, you must obtain an RMA number from the 

Turner BioSystems Service Department before shipping the instrument. This number is necessary for 
tracking and repair under warranty. 

 
4.  Reference the RMA number on the outside of the package. Pack the instrument well as damage 

incurred during shipping due to improper packing is not covered by warranty. Purchase shipping 
insurance for the package and ship it to the Turner BioSystems Service Department. All shipments 
must be prepaid.  

 
The instrument will be repaired and returned free of charge for any customer in the United States. Turner 
BioSystems will pay for return shipment and include a reimbursement check for the cost of surface 
shipment to the Service Department.  
 
Turner BioSystems cannot pay shipping, duties, or documentation costs outside the continental United 
States. Contact Turner BioSystems for instructions if you are an international customer who made a 
purchase directly from Turner BioSystems (not from a third party distributor). Customers outside of the 
United States who have purchased our equipment from an authorized distributor should contact their 
distributor directly for further instructions. The instrument will be repaired at no charge if it is under 
warranty.  
 
 

IMPORTANT:

 Under no circumstances should the instrument or accessories be returned without prior 

authorization from Turner BioSystems or our authorized distributor.  

 
 

Summary of Contents for TBS-380





















Reviews: