background image

HYDROCAL-M4

User manual_v1.3

B METERS srl
Via Friuli, 3

33050 Gonars (UD)

Italy

Tel: +39 0432 931415
Tel: +39 0432 1690412
Fax: +39 0432 992661

Sales/info: [email protected]
Support: [email protected]
www.bmeters.com

SOGGETTO A MODIFICHE SENZA PREAVVISO

1

Table of Contents

1.

 

Introduction ..................................................................................

 

2

Packaging content ........................................................................... 2

Storage conditions ........................................................................... 2

General information ......................................................................... 2

2. Safety information ...................................................................... 2

Steps for troubleshooting ............................................................... 3

3. Functionality ................................................................................ 4

4. Display and buttons .................................................................... 4

5. Commissioning ............................................................................ 5

Procedure for commissioning ......................................................... 6

6. Consultation menu ...................................................................... 6

Level S1 - Initialization

 ..................................................................... 6

Level S2 - Configuration and initialization

 .................................... 6

Level 1 - Cumulative values

 ............................................................ 7

Level 2 - Instantaneous operating values

 ..................................... 7

Level 3 - Configuration (read only)

 ................................................ 8

Level 4 - Yearly history log (day 1 and 2)

 .....................................10

Level 5 - Counter data

 ...................................................................10

Level 6 - Monthly/biweekly history log

......................................... 11

Level 7 - Yearly history log

 ............................................................. 11

Level 8 - Errors and anomalies

 ......................................................12

Level 9 - Error log

 ............................................................................12

7. Operating mode – Radio activation

 ...........................................13

Radio parameters ............................................................................13

8. Operating mode - M-Bus and pulse inputs activation

 ............13

Radio indicators on display

 ............................................................13

9. Errors and anomalies ................................................................ 14

10. Battery and replacement procedures

 .....................................15

11. Technical data ...........................................................................16

12. Information for the correct disposal of the product ..............17

13. Head Loss Curve

 ......................................................................17

14. Quick menu scheme.................................................................18

Annex A .........................................................................................20

Summary of Contents for HYDROCAL-M4





















Reviews: