background image

SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

11

5.3

 Total counting hours - heating (DDDD.HH.MM).

5.5

 Total counting hours with flow and without a difference of 

temperature (DDDD.HH.MM).

5.4

 Total counting hours - cooling (DDDD.HH.MM).

5.6

 Total counting hours without errors (DDDD.HH.MM).

Level 6 - Monthly/biweekly history log

Level 7 - Yearly history log

6.1

 Date of storage of the monthly history (up to 24 possible values). 

Default: save at the end of the month, biweekly historical data 

disabled.

7.1

 Date of storage of the annual history (up to 12 possible values). 

Default: save at the end of the year.

6.1.2

 Accounted energy (cooling) – cumulative value at monthly 

historical data.

7.1.2

 Accounted energy (cooling) – cumulative value at annual 

historical data.

6.1.3

 Accounted impulse input 1 – cumulative value at monthly 

historical data.

6.1.4

 Accounted impulse input 2 – cumulative value at monthly 

historical data.

6.1.5

 Average supply temperature – average value at monthly 

historical data.

6.1.6

 Average return temperature – average value at monthly 

historical data.

6.1.7

 Average ambient temperature – average value at monthly 

historical data.

6.1.8

 Average power (Kw) – average value at monthly historical data.

6.1.9

Average flow rate (m3/h) – average value at monthly historical 

data.

6.1.1

 Accounted energy (heating) – cumulative value at monthly 

historical data.

7.1.1

 Accounted energy (heating) – cumulative value at annual 

historical data.

Summary of Contents for HYDROCAL-M4





















Reviews: