Turin TU-SB-979-48-36-R, Installation And Owner'S Manual

Page: 71 / 118

Sliding Door Installation
1. Measure the width of the shower opening at the top between the fixed glass and
the wall. Note this is dimension "X".
y
2. The following equation is used to determine the length to be cut from the rail in
order to fit the shower opening.
y = X-%"
3. Measure distance "Y" from the end of Top Rail (2) with pre-assembled hardware
mark the top rail.
NOTE: Do not cut the end of top rail with pre-assembled hardware. Only cut the
end of top rail opposite the pre-assembled hardware.
4. Using a hacksaw or jigsaw cut the Top Rail (2) at the mark. Carefully remove
any burrs or sharp edges remaining on Top Rail (2) after the cutting.
11