Turin TU-SB-979-48-36-R, Installation And Owner'S Manual

Page: 10 / 118

Installation of Vertical channel
and glass clamps
Using the appropriate drill bit for your wall and floor surface drill each hole location
with a 5/16" diameter drill bit. Install the plastic wall anchors provided into the drilled
holes
NOTE: If your surface is prone to cracking or chipping then it is
recommended that you pilot drill first using a smaller drill bit, and then step up
to the final size.
Using screw pack (1) attach the Vertical channel (23) to wall and attach the glass
clamps (9) to shower floor using M4x40 screws.
, fo
01/g-,
I"'"----.....,�,._..�
, fo
01/g-,
I"'"----.....,�,._..�
9