44
3. Remove the two shield attaching knobs, A.
A
A
63
4. Remove the shield to access the belt.
5. Check the condition of the belt and the tensioning
spring.
6. Replace the belt if worn or stretched.
7. Check belt tension.
8. Reinstall all shields.
64
CHECK MAIN DRIVE BELT TENSION
The main drive belt transfers power from the engine
to the Brush Cutter. It is tensioned by a spring, A,
attached to the idler.
The belt is automatically tensioned by the spring, A.
NOTE: No adjustment is required. Replace the belt
if it starts to slip.
A
65
Summary of Contents for 1305B
Page 1: ...OPERATOR S MANUAL MODEL 1305BC BRUSH CUTTER ...
Page 89: ......
Page 90: ...BC02 1009 Printed in U S A ...
