17
DAILY CHECKS TO PERFORM BEFORE STARTING THE
ENGINE
NOTE: Perform all checks with the machine on a flat,
level and hard surface
CHECK ENGINE OIL LEVEL
1. Remove the oil dipstick, A.
2. Check the oil level as indicated in the engine
owner’s manual and fill with the recommended
motor oil.
NOTE: OVERFILLING THE ENGINE OIL WILL
CAUSE LOSS OF POWER.
A
4
CHECK FUEL LEVEL
1. Remove the fuel tank cap, A.
2. Fill tank to the bottom of the fuel tank neck.
3. Use minimum of 86 octane gasoline.
4. Wipe any spilled fuel before staring the engine.
DO NOT OVERFILL THE FUEL TANK. OBSERVE
ALL SAFETY STATEMENTS LISTED IN THE
SAFETY INFORMATION SECTION
A
5
TRANSMISSION OIL LEVEL
1. Check that the oil level is to the full line, A, on the
reservoir bottle.
2. Add 10W30 API motor oil as described in the
“Service” section to the level of the black tie strap.
DO NOT OVERFILL.
A
6
Summary of Contents for 1305B
Page 1: ...OPERATOR S MANUAL MODEL 1305BC BRUSH CUTTER ...
Page 89: ......
Page 90: ...BC02 1009 Printed in U S A ...
