75
V01.0| 2016/04
Pro
g
ramm
able Ga
teway
s B
Lxx
-PG-EN-V
3
7.12
Slot Parameters
7.12.1
Parameterization of the in-/ outputs
The "Parameters"-page is used to parameterize the module's I/O-channels.
Change parameters
Change the module parameters in the web server.
Write the changes into the device via "Submit".
Restart the device (voltage reset or pressing the set-button).
The device has accepted the new settings, the settings have become active.
NOTE
Parameter changes by the web server are valid in the device until the CODESYS program
is downloaded to the device again, the device is restarted or parameters are changed in
CODESYS by online change.
Fig. 52: Web server „Parameters“
NOTE
"Reset" only resets the changes done in the web server mask back to the original values.
The function does not influence the device itself.