manualshive.com logo in svg

turck BL20-PG-EN-V3, User Manual, Page: 67 / 78

Share
Download
turck BL20-PG-EN-V3 User Manual Download Page 67

USB Host port functions

Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com

66

USB_DATA_WRITE

Plug the storage device into the USB Host port.

The RUN-LED flashes with 0.5 Hz.

Press the SET-button within the next 30 seconds for at least 3 seconds.

The RUN-LED flashes with 2 Hz. The data are stored to the BLxx-PG-EN-V3.

The RUN-LED flashes orange with 1 Hz. The storing is completed.

Unplug the storage device.

The device is automatically restarted.

6.2.4

Behavior of the RUN-LED in case of an error

 

Error

Description

LED behavior

Timeout

–

The SET-button has not been pressed within the 30 seconds 
after the plugging of the storage device.

Red/green flashing (1 Hz)

Invalid folder

–

The storage device contains one folder with an invalid folder 
name.

–

The storage device contains several folders with valid folder 
names.

Empty folder

–

The storage device contains one valid , but empty folder.

USB deacti-
vated

–

The USB Host function has been deactivated using vie web-
server or CODESYS program.

Red/green flashing (0.5 Hz)

Summary of Contents for BL20-PG-EN-V3















































































Reviews:

No comments