13
V01.00 | 2020/04
Connection with spring-type terminals
➤
Push the opening lever with a suitable screwdriver.
➤
Insert the stripped cable ends (7 mm) in the guides of the spring-type terminals.
➤
Pull the screwdriver to fix the cable ends.
Fig. 3: Connection with spring-type terminals
➤
Make sure that only suitable equipment, e.g. sensors, are connected to the device (see
pendix: Connection and Wiring Diagrams“
➤
Make sure that a suitable power supply with the following characteristic is used:
Minimum voltage
10 VDC
Maximum voltage
30 VDC
Minimum Power
4 W
2
1
0.2…2.5 mm
2
(24…13 AWG)
7 mm
