11
TROUBLE SHOOTING GUIDE
1. Verify that all the bolts and nuts are locked properly and the turning parts should be
turned freely without damaged parts.
2. Clean the equipment with soap and slightly damp cloth only. Please do not use any
solvent to clean the equipment.
This exercise device is designed only for use at home.
EXERCISE DEVICES CLASS HC ARE NOT SUITABLE FOR
THERAPEUTIC PURPOSES! Your physician should perform a general
health examination prior to starting your exercise program and discuss any
possible hurt, circulatory or orthopedic issues.
Problem
Potential Cause
Corrections
Base is unstable.
1. Floor is not flat or there is small
object under the front or rear
stabilizer.
2. The rear stabilizer end caps
have not been leveled when
adjusting.
1. Remove the object.
2. Adjust the rear stabilizer
end caps.
Handlebar is shaking. The Bolts are loose.
Tighten the Bolts.
Loud noise from the
moving parts.
The interval of the parts is improper
tighten.
Open the covers to adjust.
No resistance when
riding the bike.
1. The interval of the magnetic
resistance increases.
2. Tension control knob is damaged.
3. Belt slips.
4. The bearing set is damaged.
1. Open the covers to adjust.
2. Change the tension control
knob.
3. Open the covers to adjust.
4. Change the bearing set.
