page 6
T X P S E R I E S E N G I N E E R I N G I N F O R M A T I O N
d a t a s h e e t
TXP-151
INSTALLATION AND
RIGGING HARDWARE
The enclosure is fitted with a dual angle pole mount socket, allowing the cabinet to be
mounted on a straight pole over a bass cabinet, or alternatively on a 35mm speaker stand,
either vertically or raised higher and angled downwards in order to improve audience
coverage.
The enclosure is fitted with two M10 rigging points on the top and one on the back, to allow
single loudspeakers to be rigged in permanent installations using M10 shoulder eyebolts with
a minimum thread length of 20mm. The single back panel rigging point is used to set the
desired downward inclination.
The PB-55 pole bracket allows cabinets to be wall mounted in permanent installations with a
range of adjustment angles.
M10 Eyebolts
PB-55 Pole
bracket
