background image

TURBOSOUND Ltd

Star Road  Partridge Green  West Sussex  RH13 8RY  UK

tel: +44 (0) 1403 711447  fax: +44 (0) 1403 710155  • www.turbosound.com 

TXP-151  Version 1.0  07/07
© Turbosound 2007  

T X P   S E R I E S   E N G I N E E R I N G I N F O R M A T I O N

ARCHITECTURAL

& ENGINEER’S

SPECIFICATIONS

TOP

FRONT

SIDE

BACK

BOTTOM

71mm

[2.8"]

287mm

[11.3"]

92.4mm

[3.6"]

292.4mm

[11.5"]

652mm

[25.7"]

472mm

[18.6"]

408mm

[16.1"]

DIMENSIONS

The speaker shall be of the two-way digitally self-powered type consisting of one 15”

(381mm) low frequency driver and one 1” (25mm) high frequency driver together with a Class

D amplifier and control electronics module. Performance specifications of a typical production

unit shall meet or exceed the following: frequency response, measured with swept sine wave

input, shall be flat within ±3dB from 100Hz to 18kHz, and within ±10dB from 40Hz to 20kHz

(full range), within within ±3dB from 125Hz to 18kHz, and within ±10dB from 100Hz to 20kHz

(high pass). Nominal dispersion, at -6dB points, shall average 70°H x 40°V. Maximum SPL

(peak) measured with music program at stated amplifier input shall be 130dB. Dimensions:

652mmH x 472mmW x 408mmD (25.7”H x 18.6”W x 16.1”D). Weight: 28.1kg (61.8lbs). The

loudspeaker system shall be the Turbosound TXP-151. No other loudspeaker shall be

acceptable unless submitted data from an independent test laboratory verify that the above

combined performance / size specifications are equalled or exceeded.

d a t a s h e e t

TXP-151

Summary of Contents for TXP-151








Reviews: