33
3.
Check the bag for a puncture or hole which may have released the vacuum. Do not
vacuum packaging hard items with sharp points
(like bones or cracks of nut shell). Cushion sharp edges in the contents of the bag with
paper towels.
The Bag Melts:
Should sealing strip or sealing element be overheat and melt the bag, it may be neces-
sary to lift the lid and allow sealing strip or heating element to cool for a few minutes.
The canister will not vacuum:
1.
Make sure the adaptor was well connected both to the appliance and the canister
firmly.
2.
Check if the knob of the canister was on the position of “Seal”.
3.
Press the lids OR on the hose adaptor at the very beginning of vacuuming to avoid
leaking from the cover seal...
4.
Check if there are significant damages or smashes, if yes, change it for a new one.
5.
Check the function of the vacuum sealer.
6.
Make sure the rim of the canister is clean enough. If all the above situations are exclu-
ded, please contact with the appointed service agency.
DISPOSAL OF THE DEVICE
PROTECTION OF THE ENVIRONMENT
At the end of the life of your product, it should go to a specially adapted waste-recycling
centre.
ENVIRONMENT PROTECTION FIRST
1.
The symbol
on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it should be handed over to the applicable.
Collection point for the recycling of electrical and electronic equipment.
2.
By ensuring this product is disposed of correctly, you will help prevent potential ne-
gative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product .For more detailed information
about the recycling of this product, Please contact your local council office or your hou-
sehold waste disposal service.
WIRING INSTRUCTIONS – FOR U.K.ONLY.
SAFETY NOTES – FOR REWIREABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS 1363 13 A plug. Should