turbofan 30D Series, Installation And Operation Manual, Page: 12 / 20

Operator Accessible Parameters
10
With the Oven in ‘Stand-By’ mode:-
1.
ENTER THE OPERATOR PARAMETER MODE.
Press 'Grill / Broil' and 'Start / Stop' buttons together.
‘Temperature’ Display w ill show ‘PAS’.
The ‘Time’ Display w ill flash.
2.
SET PASSWORD
.
Rotate ‘Timer Control’ to set password;
(123) (Operator Password).
Press ‘Light On / Off’ button to confirm password.
‘Temperature’ Display w ill show one of Parameter Codes.
‘Time’ Display w ill show value of the parameter.
3.
SETTING THE PARAMETERS.
Rotate ‘Timer Control’ to parameter required.
Press ‘Light’ button to confirm parameter. ‘Time’ display will flash.
While ‘Time’ display is flashing, rotate ‘Timer Control’ to select
value required.
Press ‘Light’ button to confirm value. ‘Time’ display will stop flashing.
4.
EXITING THE PARAMETER MODE.
Press ‘On-Off’ button, to return to ‘Stand-By’ mode.
Turn -On Pre-Heating Temperature. (60 - 260˚C / 140 - 500˚F).
150ºC
(325ºF)
Light Auto ‘Off’ Setting Time -
0 = ‘On/Off’.
1 = 1 minute auto ‘Off’.
2 = 2 minutes auto ‘Off’, etc.
0
Buzzer Volume - Can be adjusted from ‘0’ to ‘10’. 5
Preheat Ready Temp above Set Temp (Programs Only) - (Can be adjusted from 0 to 30ºC { 0 to
54ºF} above Cooking Temperature).
20ºC
(36ºF)