turbofan 30D Series, Installation And Operation Manual, Page: 11 / 20

Operation
9
Oven can be pre-programmed with up to 20 Program’s. When you receive your oven, the controller is not programmed. To
set programs, carry out the following for each program required:-
1.
ENTER PROGRAMMING MODE.
Press ‘Programs’ button to enter ‘Programming’ mode.
2.
SELECT PROGRAM REQUIRED
.
Rotate ‘Temperature Control’ to program required.
Temperature Display will show program selected.
Press and hold ‘Temperature’ button until
‘Time’ and ‘Temperature’ displays and
‘Temperature’ button LED flashes.
Change time and temperature parameters.
3.
ENTER COOK TEMPERATURE
.
Rotate ‘Temperature Control’ to set cook
temperature.
+ to increase the temperature.
- to decrease the temperature.
‘Temperature’ Display w ill show temperature
selected.
4.
ENTER COOK TIME
.
Rotate ‘Timer Control’ to set cook time.
+ to increase the time.
- to decrease the time.
‘Time’ Display w ill show time selected.
‘Time’ and ‘Temperature’ displays and
‘Temperature’ button LED flash.
Press ‘Temperature’ button to confirm ‘Time’ and
‘Temperature’ settings.
Heating ‘On’
Indicator
Timer ‘On’
Indicator