TurboChef SOTA NGO, Service Manual

Page: 83 / 85

APPENDIX - REPLACING OVEN COMPONENTS A-10
Figure A-12: Outer Shell Removed - Control Panel
75
81
84
72 73
74
80
79
76
Figure
Reference #
Item Description Item Part Number Hardware Description Hardware Part Number(s)
72 Cable, Display, Power, 3-Pin, 3-Wire i1-9475 None None
73 Cable, Display, Ribbon, 26-Pin, 5” 100196 None None
74 Cable, Smart Card Reader 100182 None None
75 Control Board CON-7002 Screw, #6-32 x 3/8, Int Tooth, PPH, SS 102911 (qty 4)
76 Display, TFT CON-7011 Screw, #6-32 x 3/8, Int Tooth, PPH, SS 102911 (qty 4)
77 Display Bracket, Bottom i1-9465 Screw, #6-32 x 3/8, Int Tooth, PPH, SS 102911 (qty 2)
78 Display Bracket, Top i1-9464 Screw, #6-32 x 3/8, Int Tooth, PPH, SS 102911 (qty 2)
79 Housing, Control, Left End
i1-9057 (SOTA)
i1-9453 (SBK)
Screw, #10-32 x 1.00, Skt Hd, SS
Nut, Keps, Hex, #10-32, Ext Tooth, Cres
Pin, Roll, 0.125 Dia x 1.00 Lg, SS 101800 (qty 2)
102963 (qty 2)
101133 (qty 2)
80 Housing, Control, Display
i1-9058 (SOTA)
i1-9452 (SBK)
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 4)
81 Keypad*
i1-9451-1 (SOTA)
i1-9451-2 (SBK)
None None
82 Light Ring, LED (SOTA only) i1-9198 Screw, #8-32 x 1/2, PPHD, Int Sems, SS 102923 (qty 2)
83 Medallion, Display
i1-9491 (SOTA)
i1-9489 (SBK) Nut, Push, 1/8”
Screw, #8-32 x 1/2, PPHD, Int Sems, SS 101293 (qty 4)
102923 (qty 2)
84 Smart Card Reader 100506 Screw, #6-32 x 3/8, Int Tooth, PPH, SS 102911 (qty 4)
85 Trim Bezel, Display* i1-9454 Nut, Push, 1/8” 101293 (qty 8)
86 Trim Ring, Logo (SOTA only) i1-9455 Nut, Push, 1/8” 101293 (qty 4)
77
78
85
82
83
86
To prevent interference with display,
do not apply push nut to this prong.
* To prevent air bubbles when laying the keypad, start by sticking one end of the keypad to the surface and
then laying it across towards the other end. As you lay the keypad, ensure a proper seal.