background image

23

Contents

THESE INSTRUCTIONS ARE VALID ONLY FOR THE DESTINATION COUNTRIES
WHOSE IDENTIFYING SYMBOLS ARE INCLUDED ON THE COVER OF THIS
MANUAL.

INSTRUCTIONS FOR THE USER: these contain user advice, the description
of the controls and the correct procedures for cleaning and maintenance of
the appliance.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
technician who must install the appliance, set it functioning and carry out
an inspection test.

1.

INSTRUCTIONS FOR USE .............................................................. 24

2.

SAFETY PRECAUTIONS ................................................................. 26

3.

ENVIRONMENTAL CARE................................................................. 28

4.

GET TO KNOW YOUR OVEN........................................................... 29

5.

USING THE OVEN ........................................................................... 31

6.

CLEANING AND MAINTENANCE .................................................... 35

7.

EXTRAORDINARY MAINTENANCE ................................................ 39

8.

OVEN INSTALLATION ...................................................................... 41

Summary of Contents for ALFA 150





















Reviews: