Install the Rotisserie Motor onto the Motor Bracket as shown below. Be sure the Motor attaches to
the Bracket with the electrical cord down. This installation insures that once the Spit is inserted into
the Motor it will also rest securely into the slot of your grill bowl.
4.
Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the right
side of your grill. Place the Collar into the slot opening on the left side of your grill bowl, then tighten
the Collar Thumbscrew. The Collar will stabilize the Rotisserie during the cooking process and allows
the Rotisserie Spit to turn smoothly. Plug the Rotisserie into an outlet and turn on to test.
5.
BEFORE rotisserie cooking you will need to remove the Cooking Grid(s) and possibly the Heat Diffusers
from your grill. When rotisserie cooking place a Cooking Pan under the food to be cooked. This will
capture the drippings and keep your grill clean of excess grease which could cause a fire. Use caution
when moving a Cooking Pan containing hot oils.
The Collar must always be used with this Rotisserie
25
Rotisserie Motor
Motor Bracket
Rotisserie Spit must rest securely
into the slot of your grill bowl
Holding Forks
Spit
Thumbscrew
Collar
Motor
