5
Operation & Maintenance
Operation
Touch light button once to ch on and twice to switch off the light. Touch/Slide on the
speed bar to adjust speed level, be reminded that intensive speed (4th speed) only
lasts for 3 minutes and automatically exit to 3rd speed while you can restart it by
touching on the end section of speed bar again. Touch delay-off button once to enter
3-minute delay-off mode and touch twice to switch off the hood immediately.
MAINTENANCE
Glass and aluminum are two of the easiest materials to keep clean. Occasional care
will help preserve its fine appearance.
Cleaning tips:
•
Hot water with soap or detergent is all that is usually needed.
•
Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth
to avoid water marks.
•
For discolorations or deposits that persist, use a non-scratching household
cleanser or stainless steel polishing powder with a little water and a soft cloth.
•
For stubborn cases use a plastic scouring pad or soft bristle brush together with
cleanser and water. Rub lightly in direction of polishing lines or “grind” of the
aluminum finish. Avoid using too much pressure that may mar the surface.
•
Do not allow deposits to remain for long period of time.
•
Do not use ordinary steel wool or steel brushes. Small bits of steel may adhere
to the surface causing rust.
•
Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with aluminum finish for extended period. Many of these
compounds contain chemicals that may be harmful. Rinse with water after
exposure and wipe dry with a clean cloth.
•
Painted surfaces should be cleaned with warm water and mild detergent only.
