FUNCTION
POWER ON
Push POWER button
COOLING MODE
Push the ‘MODE’ button until
‘COOLING’ lamp is lit.
Change desired room
temperature
Push the ‘TEMP
▲▼
’ button.
Change ‘FAN SPEED’
Push the ‘FAN SPEED’
button.
OPERATION
1. The unit starts working.
(It is delayed 3 minutes after main
power source is supplied.)
2. Default mode is ‘COOLING’ mode.
3. Default desired room temperature is
‘26°C’ (79°F).
And fan speed is ‘LOW’.
4. When you turn off the unit in cooling
mode, the fan will still work for about
10 seconds.
1. Operating modes are changed as
follows by pushing “MODE” button.
(COOLING
→
TURBO
→
FAN
→
COOLING)
2. The compressor and fan is running.
3. In this mode you can change fan
speed and desired temperature at
any time.
4. SLEEP mode and ON/OFF TIMER
can be selected. (By remote control
button only)
1. The desired room temperature is
changed within a range from 16°C
(60°F) to 32°C (90°F) by 1°C (°F)
increments.
1. FAN SPEED is changed as follows
by pushing “FAN SPEED” button.
(LOW
→
HIGH
→
LOW)
DISPLAY
1. Current room temperature is
displayed.
2. ‘COOLING’ lamp is lit.
1. Current room temperature is
displayed.
2. ‘‘COOLING’ lamp is lit.
1. It displays desired room temperature
when ‘TEMP’ button is pushed.
2. Desired Temperature is shown by
blinking display.
3. After a few seconds, display is
changed back to current room
temperature.
1. It displays as follows.
2. After a few seconds, display is
changed to current room
temperature.
ROOM TEMP
DESIRED TEMP
FAN
TURBO
COOLING
TIMER
ENERGY
SAVE
HIGH
LOW
POWER
MODE
TEMP
MODE
TEMP
FAN
SPEED
FAN SPEED
or
or
or
or
ROOM TEMP
DESIRED TEMP
FAN
TURBO
COOLING
TIMER
ENERGY
SAVE
ROOM TEMP
DESIRED TEMP
FAN
TURBO
COOLING
TIMER
ENERGY
SAVE
12