4
• SAFETY INSTRUCTIONS
The wall receptacle should be dedicated line used only for this air conditioner. Be sure the electrical
supply is adequate for the model air conditioner you have chosen. The complete electrical rating of your air
conditioner is stated on the name plate located at the unit’s side. Be sure the wall receptacle is close enough
for the power cord to reach it.
This air conditioner is for residential use only (120V AC outlet).
It is not intended to be used in commercial or industrial settings.
Warning - To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, follow basic precautions, including the following:
To ensure familiarity with the controls, safety features and operation of your air conditioner, read all
instructions before using.
Use this appliance only for its intended purpose as described in this manual
This appliance must be properly installed in accordance with the installation instructions, before it is used.
Never unplug your appliance by pulling on the power cord. Always grasp the plug firmly and pull straight
out from the outlet.
Immediately replace worn power cords, loose plugs/power outlets.
Unplug your appliance before cleaning or before making any repairs.
Do not operate your appliance in the presence of explosive fumes.
Do not operate your appliance when parts are missing or parts are broken.
Do not operate this appliance unless all enclosure panels are properly in place.
Do not tamper with controls.
Close supervision is necessary when the appliance is used near children or pets.
This appliance must be connected to a proper electrical outlet with the correct electrical supply.
Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR REMOVE THE
GROUNDING PLUG. If you do not have a three-prong electric receptacle outlet in the wall, have a certified
electrician install the proper receptacle. The wall receptacle MUST be properly grounded.
Do not repair or replace any part of the appliance or attempt any servicing unless specifically
recommended in the user-repair instructions, and only if you understand and have the skills to carry it out.
To reduce the risk of electric shock or fire, do not use extension cords or adapters to connect the unit to
electrical power source.
Never insert fingers, pencils or any other object through the grille when fan is running.
Rain may create an electrical hazard. Do not leave the fan operating adjacent to an area where water has
collected, to avoid the potential of electrical hazard. Do not immerse unit, plug or cord in water or spray with
liquids.
Do not place air conditioner or any parts near an open flame, cooking or other heating appliance.
Do not use near curtains, plants, window treatments etc.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away
from traffic area where it will not be tripped over.
To prevent overload and blown fuses, be sure that no other appliance is plugged into the same
outlet (receptacle) or into another outlet (receptacle) wired into the same circuit.
Ventilate room periodically during use, especially if using gas appliances.
SAVE THESE INSTRUCTIONS
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
