6
The outdoor unit is connected to the indoor unit
through the AC connecting wire or connection
cord.
NFORMATION:
1. The plug shall be connected to a ground socket
outlet, and the interconnection cord shall be
connected by an authorized electrician or specialist.
2. Information for interconnection cable:
3. Contact service man for the installation shall be in
accordance with national wiring regulation
OPERATION
CONNECTING THE AC CORD
NOTES:
• Never connect the AC line cord plug to other than the specified voltage (220V).
• Use the attached power cord only.
• If the outlet is a 3-pronged type or others, have an elec-trician install a new outlet.
• The new air conditioner system should be on it’s own 220V circuit. Contact your local electrical installer
for in-stallation.
Items Specifications
TAS-09SVH/12SVH
AC 250V, 10A, AWG 18
To install the batteries, follow the procedures below:
HOW TO INSTALL BATTERIES
1. Open the cover
after pressing
the arrow
direction and
pulling out.
2. Put the Alkaline
batteries
(1.5V, AAA)
by
direction.
3.Close the cover
after pushing into
arrow direction.
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufac-turer’s directions).
