7
Do not over tighten bulb clamps or
deform the bulb in anyway. Install all
refrigeration
system
components
in
accordance with applicable local and
national codes and in conformance with
good practice required for the proper
operation of the system.
All piping must be protected where it
passes
through
walls
or
ceilings.
Precautions should be taken to see that
the piping does not touch any structural
the transmission of vibration into the
building.
The piping chase must be thoroughly
sealed to protect the tube and prevent
ambient air from entering the refrigerated
space. Seal around the drain line where it
passes through the wall. Air leaks can
cause equipment problems. Damage the
structure and product, increase load,
increase operating cast, and can cause a
safely hazard. Eliminate all air leaks.