8
The blade can be changed rapidly and expediently without any tools.
1. To change the blade, you must remove the Blade cover (A) at first. Follow the
steps as shown in the upper figure.
1
Hold the machine in one hand as showed in the upper figure. Lever the
retainer (B) upwards with your thumb and forefinger of another hand.
2
Hold the blade cover firmly and pull it backwards.
3
Remove the blade cover upwards.
2. Take off the blades and install another blades.
Warning! DO NOT operate the switch before the blade cover is
installed. Risk of injury!
3. Install the blade cover following the steps as shown in the nether figure.
1
Insert the blade cover align the two lines marked in the upper figure.
2
Push the blade cover forwards until the retainer fit in a suitable position.
