RS
ON
10
9
8
7
6
5
4
3
2
1
6A
Max.
GND
Data -
Data+
GND
Data -
Data+
+12-24V
GND
DC
IN
Made in P.R.C.
DMX ADDRESS SETTING
DMX
IN
DMX
O
UT
AL
-DIMMER
-1
P
RO
1
1
2
2
4
4
8
8
16
16
32
32
64
64
128
128
256
Dim
Addr
Load
(6
A
)
max
Analog
GND
+12-24V
+12-24V
GND
GND
0-10V IN
On
Off
DESCRIPTIONS
24-004-2461-00
Rev 1.1
Congratulations with your purchase of this product.
Check for transport damage.
You should be in possession of the following items:
1 AL-Dimmer-1 PRO
1 Manual, 1 Screwdriver & 1 Connecting part
Should you discover transport damage after unpacking the
equipment, inform the hauler immediately. Never connect a
damaged device. You may also contact your supplier.
DELIVERY PACKET
TECHNICAL SPECIFICATIONS
Operation temperature
Housing
Control Protocol
Listing
Dimensions
Weights
0 degC to + 40 degC
Black plastic
DMX-512 (1990)
CE certified
50g
Power Requirement
12~24VDC 6A Max
*Please Note:
Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
OPERATION GUIDE
1.DMX Control Mode(DMX Addressing)
DMX is short for Digital Multiplex. This is a universal binary language used as a form of communication between
intelligent fixtures. Each Dip Switch represents a binary value.
In this mode, the dip-switch 10 is flipped to the "
" position, DMX address can
be addressed and the intensity of LED product is dimmable.
ON
1 2
3
4
5
6
7
8
9 10
ON
OFF
1 =
0=
Connection
Terminal
Read this manual carefully before using our AcclaimLighting AL-Dimmer-1 PRO. This unit serves as a single channel
dimmer. A maximum of up to 6A loads are allowed on a single output, DMX address enables to be addressed by
flipping the dip-switch. The dimmer is available in DMX Control Mode, Manual Dim Mode and features 0-10V analog
input. The intensity of LED product can be dimmed in the Manual Dim Mode.
AL-Dimmer-1 PRO
Input
2-pin terminal connector for Power In
2-pin terminal connector for Analog In
3-pin terminal connector for DMX In
Output(6A Max.)
3-pin terminal connector for DMX out
4-pin terminal connector for LOAD
90(L) x 40(W) x 20(H)mm
User Instructions
AL-Dimmer-1 PRO
-Page 1-
INGRESS PROTECTION RATING
IP20
