background image

Copyright © 2001 Tunstall Group Ltd.

Telecom 4000 User Guide

1

Setting up

Three simple steps

1.

Place Telecom

 in a suitable position

2.

Connect Telecom

 to your telephone line and a power socket

3.

Test Telecom

 by pressing the radio pendant to raise an alarm

Although Telecom is a rather clever piece of equipment, it is quite robust, and you can

treat it just like any other telephone. However, this means that you 

should not:

Place your Telecom next to something that makes a lot of noise, such as

next to a television, radio or washing machine.

Put it right next to your cooker, or close to any other heat source.

Set Telecom in a place where it will get damp, such as a bathroom, or

near house plants that are sprayed at any time.

Place it very close to any large metal objects, such as microwave ovens, as

large pieces of metal stop the signals from the radio pendant reaching Telecom.

Put Telecom on top of something soft, such as a thick towel, as this can

stop sound reaching the microphone.

Place Telecom 4000

Place Telecom on a flat surface, or have it

mounted on a wall. Put it somewhere you

can easily reach. It should also be close to

a telephone socket and a power socket.

Attaching to a wall.

 If you decide to

attach your Telecom to a wall then you

will find slots to grip the screws on the

back of Telecom. There is a separate paper

template included in the packaging that

will show you where to drill the holes for

the screws.

Note: As most users do not mount Telecom

4000 on the wall the screws needed for

mounting are not provided.

Summary of Contents for Telecom 4000





































Reviews: