Using Not Worn Alerts (Lifeline Vi/Vi+ only)
The iVi can also assess whether it is being worn. The period before this raises an alarm is
configurable (3, 5 or 7 days). This feature is turned off by default and only turned on in
advanced mode.
The not worn alert is calculated from the last movement of the iVi therefore subsequent
alerts can occur at night. PC Connect* can be used to inhibit not worn alerts between
specific times. In PC Connect go to ‘Time Windows’ and use ‘inhibit selected alarms’.
*Requires PC Connect version 1.46 or above and Lifeline Vi firmware 5.53 or above
This feature is not a measure of the user’s well-being and must only be used to indicate that
the user has not been wearing their iVi to help service providers and family members to
encourage the user to wear it. In order to achieve this, the not worn alert can be used in two
ways:
•
Either
– Provide an alert to the monitoring centre for an operator to understand the
reasons and if required encourage the user to wear the iVi
•
Or
– Using the new Voice Announcer feature on Lifeline Vi+, provide a local reminder
to the user by recording a message in a familiar voice encouraging them to wear
the iVi
Programming to Communicall or the CareAssist
For instructions on how to program the iVi to the above systems please refer to the relevant
system instructions.
Spares and Accessories
The following replacement parts are available.
Description
Part Number
Battery - CR2450* (pack of 5)
S1004050
Belt clip (pack of 10)
D6602038
Brooch/Shirt clip (pack of 10)
D6602039
Neck cord (pack of 10)
D6602045
Battery cover (pack of 10)
D6602040
*Only use batteries recommended by Tunstall.
