Tumo-Int 3000W 5 Blades Wind Turbine, User Manual

Page: 7 / 22

6
BEFORE INSTALLATION, PLEASE ENSURE ALL COMPONENTS IN CARTON ARE
FULLY MATCHED THE PACKING LIST, IF IN LACK OF ANY PARTS, PLEASE
CONTACT US IMMEDIATELY.
One ---- Wind Turbine Introduction
1.1 Blades: Patented blades with efficient twisted aerodynamic design are made with
Nylon and reinforced fiber glass materials by precision injection molding technology.
The blades are of exceptional consistency and aerodynamic outline with a mass
distribution that ensures the rotor operates with minimum noise and minimal vibration.
Tumo-Int wind turbine has very low start-up/cut-in wind speed and a high coefficient of
productivity, which is specially designed to prevent the blades from feathering post stall.
1.2 Generator: Made from high-quality rare earth permanent magnets material. The
wind turbine is of small size, light weight and high-efficiency power generation
characteristics. Unique electromagnetic design technique has endowed the wind
turbines in an excellent start performance, which effectively ensures Tumo-Int wind
turbine can be started up in a gentle breeze.
1.3 Body: Tumo-Int wind turbine, adopts high-quality aluminum alloy material and
stainless steel accessories, which is light weight. It has such high reliability that can be
applicable to various working conditions, such as severe climate, an ambient
temperature from -30 to 60 , high humidity, sand and salt
℃ ℃
corrosive environment as
well.
Tumo-Int wind turbine is elegant and easy to install, which makes you enjoy clean
energy in all-weather circumstances, as well as a joyful landscape.
Two ---- Siting
Small changes in wind speed and wind direction can have a dramatic effect on
power production. In general, the higher the tower, the greater the wind speed
and ultimately power production. Therefore, the siting of your wind turbine should
be carefully considered. Each installation is different and is often a compromise
among tower height, distance from the battery bank, local zoning requirements
and obstacles such as buildings and trees.
Specific requirements about installation and sitting of wind turbine are as follows:
2.1 The minimum recommended tower height is 8m on open ground or 5m above
nearby obstructions (Fig. 1), there are no obstacles within 100 meters as far as
possible;