Draco 3000 / Draco 4000
26
Unfolding requires the driver to see the realization of one stage to the end before the next
stage can be started. This is a safety factor. The driver follows the movements taking place
when the unfolding is not fully automatic.
Stage 3 is complete, when side blocks have folded next to the middle section and rear harrows have
unfolded to their working widths, picture 42.
Stage 2 is complete when the wheels of the side section have come down to the same level as the
wheels in the middle section. Side sections are then locked into place, picture 43.
Stage 1 is complete when cultivators are down in their working width, picture 44.
Picture 42. Stage 3 complete. Picture 43. Stage 2 complete. Picture 44. Stage 1 complete.
Now the machine is ready for sowing. Start menu can be accessed from folding menu by pressing
the arrow on the bottom left, picture 35.
11.4 Settings menu and service window
Settings menu is accessed from start menu by pressing button 2, picture 34. Settings menu is used
to determine the machine's basic setting values. These are setting the progression (determines the
correctness of the sowing area), setting the working width, time delays of the axle guards and surface
monitor sensors, screen brightness and switching the alarm sound either on or off. The area
calculator (ha) in the centre of the settings menu is the total area that the machine has sown. It
cannot be reset. In the factory the machine was set with factory settings and it is not necessary to
change them. For this part the machine is ready for sowing work without changing the
aforementioned settings.
Picture 45. Settings menu.
1
2
3
4
5
6
7
8
