5
Access the Macros / Others / Connect to the NET section and run it. Next, on the printer screen you will see the assigned IP.
If you already have your IP, access from it, go to System and open the config.g file
ATENTION changing parameters not indicated in this file may imply the malfunction of the machine
In the Network section replace: M552 S2 for M552 S1.
Click Save
Press YES to restart the board
I have the IP
• You can now access the printer from any device connected to this network
• If you have not entered the IP by command in the console, it is recommended to do so, so that the router does not change it:
M587 S ”Wifi name ” P ” Password” I192.168.X.XXX
• If you have not obtained the IP or have any other problem, do not hesitate to consult at: https://indart3d.com/indart3d-en/support/
