11
If you have any questions about the use of the Voladora
do not hesitate to write us to the following email:
https://indart3d.com/indart3d-en/support/
Indart 3D’s 3D printing stations include the Simplify3D™
professional manufacturing suite, a software with all the
advanced and optimized characteristics to create the
most complex objects in the highest quality. It includes
a powerful simulator to make you more productive,
visualizing the result of the printing strategy you’re
working on before you start manufacturing.
You will be able to repair the imported designs in Simplify3D
itself and you will love the intelligent support option.
Spectacular functionality with which the software will
create the right support for the most complex parts.
If you have any questions about the use of the software,
please consult the following page:
https://www.simplify3d.com/support/
Open Simplify3d
In Tools go to Firmware Configuration
Below we will explain how to correctly change the nozzle.
1. Remove the material from the head
2. Unscrew the fitting and remove it together with the
bowden tube.
3. Remove the nozzle using the tool and fit the new one.
4. Make sure the tip is firmly attached to the head
5. IMPORTANT: Insert the tube into the head and check
that it enters to the correct area. (see image).
6. Screw the fitting a few turns, tighten the
flange and re-thread all the way.
NOZZLE
CHANGE TOOL
