13
Performing a Control Solution Check
Please have your meter, strip, and control solution ready before you
perform a control solution test.
1. Activate the meter
Start with the meter off. Press the power button for 1 second to turn
on the meter. Wait for the main page to appear.
2. Start measuring
On the settings page, tap on
to enter the measuring page.
Tap
"+" and wait for the meter to display the test strip symbol.
3. Apply control solution
Shake the control solution vial thoroughly before use.
Squeeze out a drop and wipe it off, then squeeze out another drop
and place it on the tip of the vial cap.
Hold the meter to move the absorbent hole of the test strip to touch
the drop. Once the confirmation window fills completely, the meter
will begin counting down.
NOTE:
To avoid contaminating the control solution, do not directly apply control
solution onto a strip
Summary of Contents for THG001
