TufBox Light Installation
•
The interior light for the TufBox is supplied with double-sided tape which will allow the light to be placed
almost anywhere inside the drawer.
• With the light turned on (preferably in a dark environment) determine the best mounting location inside
the TufBox. Consider the following:
- This location will vary based on where the user wants the light directed.
- Contents inside of the TufBox such as dividers and equipment should also be a consideration when
determining this location.
- The best location to illuminate the entire box is located directly in the center on the underside of the
cabinet.
-
If drawer light is not centered on the cabinet there will not be enough clearance for the drawer
to work properly.
•
Prior to installation, make sure there is enough space to be able to slide the light off the back plate
to replace the batteries.
•
Remove coating from one side of the double-sided tape and adhere it to the back plate of the light.
• Remove coating from other side of double-sided tape and secure light to box.
1406 Fifth Street, SW • Canton, Ohio 44702 • USA
1-800-321-0870 • 330-452-9132 • Fax 330-452-2557
[email protected] • Tufloc.com
