background image

BA-703 Biceps curls

www.tuff stuffi

  tness.com

9

Important Safety Instructions

It is the responsibility of the facility owner and/or owner of the equipment to review the Owner’s Manual with their facility
personnel and understand all Danger, Warning and Caution labels affi

    xed on the machine. It is the responsibility of the fl oor 

personnel to instruct users on proper operation of the equipment and review all danger, warning and caution labels.

  

 

 

SERIOUS INJURY OR DEATH CAN OCCUR 

IF THESE SAFETY PRECAUTIONS ARE NOT OBSERVED:

1. 

Obtain a medical exam before beginning any exercise program.

2. 

Read and understand Owner’s Manual and all 

Danger, Warning 

 and 

Caution

 labels before using this equipment. If you still need 

 

help, seek assistance from fl oor personnel. 

3. 

Inspect the equipment

 before each use for wear and tear, loose 

 

fi ttings, worn or frayed cables and frame welds.  DO NOT USE if it 

 

appears to be inoperable or damaged.

4. 

Stop exercising if you feel faint or dizzy. Consult a physician if you  

 

are experiencing pain.

5. 

Use this equipment only for the intended use.

6.  

Keep body, clothing and hair clear from all moving parts. Do not

  

attempt to free any jammed parts by yourself.

7.  

Always warm-up before and cool-down after weight training.  

 

Warm-up for 10-15 minutes with stretching and cardiovascular 

 

exercises. Cool-down should include light stretching exercises for 

 5-15 

minutes.

8.  

Never hold your breath – will limit the fl ow of oxygen to your brain  

 

and may cause dizziness. The most often used breathing pattern is

 

inhaling during least resistance and exhaling during maximum 

 resistance.
9. 

Do not use accessories or accessory attachments that are not 

 recommended 

by 

TFI.

10.  Make sure selector pin is completely inserted. Use only the selector
  

pin provided by the manufacturer.

11.  Never pin the weights in an elevated position. Do not use the 
 

machine if found in this condition.

Facility Safety Guidelines and Practices

1. 

Read and understand the Owner’s Manual before assembling, 

 

servicing or using the equipment. 

2. 

Equipment to be installed by TFI Authorized Dealer or 

 

Professional Service Company approved by TFI.

3. 

Make sure each machine is set up and operated on a solid level 

 

surface. Do not install equipment on an uneven surface.

4.        

Anchoring of equipment must be completed

 at time of 

 

installation and inspected prior to use. Failure to anchor the 

 

machine to the fl oor could cause the machine to tip or fall over 

 

due to incorrect usage and misuse, and could result in serious 

 

injury or death.

DANGER:

 indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury.

WARNING:

 indicates a potentially hazardous situation which, if not 

avoided, will result in death or serious injury.

CAUTION:

 indicates a hazardous situation which, if not avoided, could 

result in minor or moderate injury.

5. 

Provide an adequate safety perimeter between the machine, 

 

walls and other equipment to ensure that the facility has proper 

 

clearance for usage and training.

6. 

Post and disclose all safety, rules and regulations on a bulletin 

 

board easily accessible to users. 

7. 

Perform regular maintenance (see Inspection Label). Pay special 

 

attention to areas most susceptible to wear and tear, including but 

 

not limited to cables, pulleys and rubber grips. 

8. 

Do not

 lean against or pull on the framework, weight stack or 

 

any component at all times.

9. 

Children must not

 be allowed near the equipment. Teenager must  

 be 

supervised.

10.  Replace immediately all parts at fi rst sign of wear or damage. If 
 

unable to replace worn or damaged components/parts, remove 

 

machine from service until the repair is made.

11.  Use only genuine Tuff Stuff  replacement parts. Failure to do so will 
 

void warranty and could result in serious injury or death to the users.

12.  

Do not remove

 any decals affi  xed to the machine. Replace if 

 damaged.
13.  

Do not alter or modify

 the original manufacturer’s weight stack  

 

with any add-on incremental weights, weight plates or 

 

dumbbells except those with standard factory installed option.

14.  Maintain a service contract with a TFI Authorized Dealer or a 
 

Professional Service Company approved by TFI. Keep a service 

 

log of all maintenance and repair activities. NOTICE: It is the sole 

 

responsibility of the owner or facility operator to ensure that regular

 

maintenance is performed.

Summary of Contents for SG BA-703

































Reviews: