background image

CG-9515 Inner/Outer Thigh

www.tuffstuffitness.com

10

Thank you for purchasing the CG-9515 Inner/Outer Thigh. This machine is part of the

TuffStuff line of quality strength training equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly. 

Required Tools

The basic tools that you will need to assemble the CG-9515 but are not 
limited to:
• 9/16” , 3/4”, 1/2” combination wrenches
• Adjustable wrench
• Ratchet wrench with 9/16” , 3/4”, 1/2” sockets
• External retaining ring pliers
• Rubber mallet, measuring tape & utility knife
• Super Lube® spray lubricant and grease 
• Windex or household glass cleaner

Assembly Requirements

Follow these installation requirements when assembling the 
CG-9515. Use the overhead view on the Content Page to layout your floor 
plan before assembling.
Set up the CG-9515 on a clean, solid, flat surface. A smooth, flat surface 
under the machine helps keep it level.

Allow ample space around the machine for safe unrestricted use and 
easier access.
Insert all bolts in the same direction. For aesthetic appearance, insert all 
bolts in the same direction unless specified (in text or illustration) to do 
otherwise.
Leave room for adjustments. Do not fully tighten fasteners until 
instructed in the assembly steps to do so (to prevent any difficulty with 
alignment of parts during the assembly process). When not instructed, 
tighten fasteners such as bolts, nuts and screws so the unit is stable, but 
leave room for adjustments.

Assembly Tips

Read all “Notes” on each page before beginning each step.
While you may be able to assemble the CG-9515 using the illustrations 
only, IMPORTANT safety notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those 
holes indicated in the instructions and illustration. 

NOTE:

 

With so many assembled parts, proper alignment and 

 

adjustment is critical. While tightening the nuts and bolts, 

 

be sure to leave room for final adjustments.

CAUTION:

  Obtain assistance from TFI if you have difficulty  

 

assembling the CG-9515. Please do not attempt to 

 

complete the assembly as this could result in equipment 

 

failure and serious injuries to the users.

Symbols & Description

Registration 

To avoid unnecessary delays on warranty parts and to insure that a 
permanent record of your purchase is on file with our company, be 
sure to register online at http://www.tuffstuffitness.com or mail to 
address shown below within 10 days of purchase. 

Obtaining Service

Please use this Owner’s Manual as your guide to all parts included in 
your shipment. When ordering parts, you must specify the part number 
and description from this owner’s manual. 

Use only genuine TuffStuff 

replacement parts when servicing the equipment.

 Failure to do 

so will void warranty and could result in serious injury or death.
For information about product operation or service:
Phone:   

909-629-1600  Toll Free 888-884-8275

Fax:  

909-629-4967

E-mail:   

[email protected] or [email protected]

Hours:   

M–F  8:00 – 4:30 PST

Or write to: 

TuffStuff Fitness International Inc.

  Customer 

Service

 

 

13971 Norton Avenue, Chino, CA 91710

Retain this Owner’s Manual for future reference when ordering 

service or parts. To assist you better, please be prepared to 

provide the following information:

 

1. Model Number  

2. Place of Purchase

 

3. Serial Number  

4. Part # and Description

Registration, Service & Assembly

Loosely Tighten

70%

100%

Fully Tighten

Loosely Tighten

Loosely tighten all hardware in this step. DO NOT Fully 

Tighten. Some component(s) may need pre-assembly 

and or alignment during the assembly process.

Fully Tighten

Wrench tighten all hardware in this step.

Summary of Contents for CG-9515





























Reviews: