background image

 

BY TUFFSTUFF FITNESS

CG-7514    Leg Extension/Curl

Registration, Service & Assembly

 Thank you for purchasing the CALGYM CG-7514 Leg Extension/Curl. This machine is part of the Tuff Stuff  line of quality strength training 
equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly. 

 

 

Required Tools

The basic tools that you will need to assemble the CG-7514 but are not 
limited to:
• 9/16” , 3/4”, 1/2” combination wrenches
• Adjustable wrench
• Ratchet wrench with 9/16” , 3/4”, 1/2” sockets
• Rubber mallet, measuring tape & utility knife
• Super Lube® spray lubricant and grease 
• Windex or household glass cleaner

Assembly Requirements

Follow these installation requirements when assemblying the CG-7514. 
Use the overhead view on the Content Page to layout your fl oor plan 
before assemblying.

Set up the CG-7514 on a clean, solid, fl at surface. A smooth, fl at surface 
under the machine helps keep it level.

 

Allow ample space around the machine for safe unrestricted use an-
d easier  access.

Insert all bolts in the same direction. For aesthetic appearance, insert all 
bolts in the same direction unless specifi ed (in text or illustration) to do 
otherwise.

Leave room for adjustments. Do not fully tighten fasteners until in-
structed in the assembly steps to do so (to prevent any diffi  culty with 
alignment of parts during the assembly process). When not instructed, 
tighten fasteners such as bolts, nuts and screws so the unit is stable, but 
leave room for adjustments.

Assembly Tips

Read all “Notes” on each page before beginning each step.

While you may be able to assemble the CG-7514 using the illustrations 
only, IMPORTANT safety notes and other tips are included in the text.

Some pieces may have extra holes that you will not use. Use only those 
holes indicated in the instructions and illustration. 

NOTE:

 

With so many assembled parts, proper alignment and 

 

adjustment is critical. While tightening the nuts and bolts, 

 

be sure to leave room for fi nal adjustments.

CAUTION:

  Obtain assistance from Tuff Stuff  if you have diffi  culty  

 

assemblying the CG-7514. Please do not attempt to complete  

 

the assembly as this could result in equipment failure and 

 

serious injuries to the users.

Symbols & Description

 

Registration 

To avoid unnecessary delays on warranty parts and to insure that a 
permanent record of your purchase is on fi le with our company, be 
sure to register online at www.tuff stuffi  tness.com within 10 days 
of purchase. 

Obtaining Service

Please use this Owner’s Manual as your guide to all parts included in 
your shipment. When ordering parts, you must specify the part number 
and description from this manual. 

Use only genuine Tuff Stuff  

replacement parts when servicing the equipment.

 Failure to do 

so will void warranty and could result in serious injury or death.

For information about product operation or service:
Phone:   

909-629-1600  Toll Free 888-884-8275

Fax:  

909-629-4967

E-mail:   

service@tuff stuff .net or service1@tuff stuff .net

Hours:   

M–F  8:00 – 4:30 PST

Or write to: 

Tuff Stuff  Fitness Equipment Inc.

  Customer 

Service

 

 

13971 Norton Avenue, Chino, CA 91710

Retain this Owner’s Manual for future reference when ordering 
service or parts. To assist you better, please be prepared to 
provide the following information:
 

1. Model Number  

2. Place of Purchase

 

3. Serial Number  

4. Part # and Description

Loosely Fasten

Finger tighten all hardware in this step. DO NOT wrench tighten. 
Some component(s) may need pre-assembly and alignment during 
the assembly process.

Fully Fasten

Wrench tighten all hardware in this step.

8

Summary of Contents for CALGYM CG-7514





















Reviews: