FIG. 5
Insure that the
Cable Assembly
is not bent
or damaged before tightening the
Plunger Protrusion
Adjusting Nuts
.
FIG. 6
Loosen
the
Plunger Protrusion Adjusting
Nuts
with two 3/4 wrenches. Push the
Plunger
and
cable further into the
Barrel
or pull it out as necessary
to adjust the protrusion. When the fi nal adjustment has
been made, re-tighten the
Plunger Protrusion Adjust-
ing Nuts
.
FIG. 7
Before using the machine, be sure that the
Plunger
fi ts easily into all seven (7) of the
Adjustment
Plate
Holes and that the end of the
Plunger
does not
make contact with the
Adjustment Plate
while chang-
ing from one position to the other.
Plunger
Adjustment Plate
FIG. 8
This illustration depicts the ideal setting for the
plunger,
as shown fl ushed with the outside surface of
the
Adjustment Plate
.
Plunger Protrusion
Adjusting Nuts
Plunger Protrusion
Adjusting Nuts
Cable Assembly
Lever Engages and
Disengages Plunger
Disengaged Plunger
Step 21 Spring Loaded Pin Adjustment
43
AXT-5S_AXT-5D AXT- Pro-Style Home Gym
Summary of Contents for AXT-5D
Page 19: ...28 60 75 166 72 72 166 75 8 60 27 19 AXT 5S_AXT 5D AXT Pro Style Home Gym...
Page 31: ...160 54 60 54 60 60 C1 C3 C2 31 AXT 5S_AXT 5D AXT Pro Style Home Gym...
Page 35: ...111 101 101 137 55 169 9 55 E1 E2 35 AXT 5S_AXT 5D AXT Pro Style Home Gym...
Page 41: ...175 103 108 50 48 103 108 9 103 108 50 103 108 41 AXT 5S_AXT 5D AXT Pro Style Home Gym...