Pro Series Safety Winch
Operator’s Manual
18
October 18, 2011, Rev 05
7. INSPECTION
7.1 DAILY INSPECTION
The winch must be inspected before each use as described in Sections 7.1.1 to 7.1.5. Report any
problems or concerns to your supervisor, and do not use the equipment until they have approved doing
so.
7.1.1 Cleaning and Lubrication
If required, clean and lubricate the winch and all its parts as outlined in Section 8. Do not use solvents or
other chemicals to clean the winch.
7.1.2 Physical Damage
Inspect the winch, winch line, snap hook, and mounting brackets for physical damage; bent parts,
cracked housings, dented covers, loose or missing hardware or parts, missing, or illegible labels (see
Figure 5). Replacement labels are available from your dealer by ordering the part number shown on each
label.
Note: Not all labels shown may be present on your winch, as some are related to standards and
certifications that may not apply to your jurisdiction.
