920.1004.02
13
PARAMETERIZATION
In parameterization mode, the LED on the radar sensor fl ashes red at a frequency of 2 Hz. Repeated steps for
parameterization.
Starting Parameterization Mode
Press the
unlock
key.
When entering the security code:
Without entering the security code:
The LED on the radar sensor flashes red at a frequency of approx. 2 Hz.
Starting Parameterization Mode
See the reverse for an overview of the available functions.
Press the required function key.
The LED on the radar sensor flashes red at a frequency of approx. 5 Hz, indicating that a numeric value is expected.
Enter a numeric value.
The LED on the radar sensor flashes green if a correct value is entered.
Exiting parameterization mode...
…using the
old
security code:
…using a
new
security code:
Note:
The LED on the radar sensor flashes red at a frequency of approx. 5 Hz.
Enter the four-digit security code using the numeric keypad.
After entering the correct security code, the LED on the radar sensor flashes red at a frequency
of 2 Hz. After entering an incorrect security code, the radar sensor exits parameterization
mode and returns to its normal operating state (LED lights
up green as long as no motion is detected).
After a network reset, no security code is required to unlock for 30 minutes.
Press the
exit-lock
key.
The radar sensor exits parameterization mode and returns to its normal operating state
(LED lights up green as long as no motion is detected).
Press the
exit-lock
key.
The LED on the radar sensor flashes red at a frequency of approx. 5 Hz, indicating that the
radar sensor is ready for a new four-digit security code to be entered.
Enter a new four-digit security code using the numeric keypad within 60 seconds.
To remove the security code, enter "0000".
The security code will be removed. In future, the parameterization mode can be
accessed without entering a security code.
