Safety
10
Hydraulic equipment
– The hydraulic swivel mechanism must only
be operated if no persons are present in
the area of rotation. Squashing and shear
points are present on hydraulically operated
parts.
– Connect the hydraulic hoses only in the
pressure-free state of the vehicle hydraulics.
– Only work on the Eco sweeping machine if
the vehicle hydraulics are depressurized.
Liquids (hydraulic oil) escaping under high
pressure penetrate the skin and can cause
severe injuries. In case of injuries, see a
doctor immediately. Danger of infection!
– Hydraulic hoses must be replaced no later
then after 6 years of usage (including
storage time of at most 2 years).
– Regularly check the hydraulic hoses and
replace them in case of damage and
ageing. The replacement hoses must
comply with the technical requirements of
the manufacturer.
– Leakages must be removed immediately as
they represent a danger to the environment.
–
When searching for leaks, use suitable
equipment to avoid injuries.
Detachment
– During detachment, the supports must be
put into their respective position.
– Before leaving the carrier vehicle, lower the
sweeping machine to the ground. Pull the
ignition key and secure the carrier vehicle
against unintended restart and movement!
2.6 Safety notices for carrying
out service, inspection and
installation work
The operator must ensure that all service,
inspection and assembly work is carried out
by authorised and qualified personnel that has
sufficiently informed itself through detailed
study of the operating manual.
Work on the machine must in principle only
be carried out during standstill. The machine's
halting procedure described in the operating
manual must be observed.
When carrying out maintenance on the
lifted device, always secure it with suitable
supports.
Use suitable tools and gloves when
exchanging machine parts.
Lawfully dispose of oil and grease.
Directly after finishing work, all safety
equipment must be reattached or made
functional.
Before restarting, the points listed in the
sections on start-up must be adhered to.
2.7 Unauthorised conversion and
spare parts manufacturing
Conversion of or changes to the machine
are only permitted after consultation with
the manufacturer. Original spare parts and
accessories authorised by the manufacturer
provide safety. The use of other parts
invalidates the liability for the consequences
thereof.