Back Edge, 18AWG
Step 30
– Cut a 8” length of black 18AWG wire and solder to terminal T50 as above.
Step 31
– Cut a 9” length of red 18AWG wire and solder to terminal T52 as above.
Step 32
– Cut a 7” length of black 18AWG wire and solder to terminal T56 as above.
Front Edge, 18AWG
Step 33
– Cut a 5” length of black 18AWG wire.
Step 34
– Strip and tin the end of the above wire and from the back of the board, insert this
wire up through the routing hole to the fuse holder tab nearest the mounting screw (photo
6.10g).
Step 35
– Solder the above black 18AWG wire to the mounting tab of the fuse holder.
(See completed board photo 6.10h)
40 TubeDepot.com
