Tube-Line BALE BOSS II, Operator'S Manual

Page: 9 / 71

2-2 Section 2 - Safety - Bale Processor Boss II
Know all your controls and know how to quickly stop all power unit movements, the processor
movement, and the engine in case of emergency. Know and follow all applicable government rules,
O.S.H.A regulations, local laws and other professional guidelines for your operation. Ensure all
personnel working with/on this machine are physically and mentally capable of the safe operation of
this type of equipment.
DANGER
DO NOT OPERATE OR MAINTAIN THIS MACHINE WHILE UNDER THE INFLUENCE OF DRUGS
OR ALCOHOL.
Wear personal protective equipment (i.e. hardhat, safety glasses, work gloves, protective shoes,
respirator, ear protection, etc.)
Never operate controls from the ground. Operate the controls only from the operator’s station. Never
leave the equipment unattended with the engine running.
WARNING
Do not wear loose fitting clothes, loose or uncovered hair or any accessories (jewelry, necktie, scarf,
wrist watch, etc.) that can catch and entangle on moving parts.
ANNUALLY REVIEW ALL SAFETY INSTRUCTIONS.
Maintenance Safety
Work on a level surface in a well lit area. Keep the area clean
and dry. Use properly grounded electrical outlets and tools. Use
the right tool for the job at hand. Make sure that your tools are
in good condition for performing the desired function. When
using tools, wear the protective equipment specified by the
tool manufacturer (i.e. hardhat, safety glasses, work gloves,
protective shoes, etc.).
Before beginning any type of work on this product:
1. Apply your power unit’s parking brake.
2. Stop the engine, remove the starter key.
3. Wait for all moving parts to stop.
4. Relieve all pressure in the hydraulic lines.
5.
Lower processor jack to the ground and lock in place.
Refer to your power unit’s operator’s manual for instructions on how to relieve hydraulic pressure in
lines.
See the specifications (
pg.1-2
) in this manual for the weight of this product and refer to your power
unit’s operator’s manuals for safe operating limits.
Never allow anyone, except the operator, to be around the power unit or this product when either is in
motion. Do not start up unless others are clear of the work area. Do not allow riders on this product or
the power unit. Do not stand or climb on this product. Do not place any part of your body under any
part of this product unless this product is secured with adequate blocking.