3-1
Section 3 - Safety Decal Locations
-
Bale Processor
Boss II
Section 3 - Safety Decal Locations
Safety Decals Placement / Replacement
Clean the area of application with non-flammable solvent, then, wash the same area with soap and
water. Allow the surface to fully dry. Remove the backing from the safety sign, exposing the adhesive
surface. Apply the safety sign to position shown in illustration below and smooth out any bubbles.
Instructions
• Keep all safety signs clean and legible.
• Replace all missing, illegible or damaged safety signs.
• Replacement parts with safety decals also require ordering replacement decals.
•
Safety signs are available free of charge from your dealer or from Tube-Line.
ITEM PART NUMBER
DESCRIPTION
1
DE23845
WARNING ! Moving Part Hazard
2
DE23847
WARNING ! High Pressure Fluid Hazard
3
DE23851
DANGER ! Injury or Death From Pinching
4
DE23848
WARNING ! Thrown Object Hazard
5
DE23837
DANGER ! Keep Hands And Feet Away
6
DE23849
DANGER ! Do Not Operate Without…
7
DE23839
WARNING ! To Prevent Serious Injury or Death
8
DE23840
CAUTION ! To Avoid Injury or Machine Damage
9
DE23850
DANGER ! Stop Engine And Remove Key
10
DE23984
WARNING ! Stay Clear While Engine Is Running
11
DE23836
WARNING ! Moving Part Hazard
Summary of Contents for BALE BOSS II
