Important Information
Easi-Headphones are designed to be robust and are ideal for use in educational
settings. The replaceable ear cushions have been designed to cover the whole
ear to minimise outside noise and to increase comfort and the quick release
cable can be removed for storage or replaced. The headband is not only
adjustable, but also very flexible, helping to limit damage.
Please read all instructions carefully before using and retain for future reference.
Contents of pack
n
EasiiHeadphonest
n
Audio connection cable
n
User Guide
Care of your Easi-Headphones
n
If necessary, wipe the Easi-Headphones gently with a clean damp cloth.
n
Keep the Easi-Headphones away from direct sunlight and heat.
n
Do not allow the Easi-Headphones to come into contact with water
or other liquids.
Connecting Easi-Headphones
n
To remove: Grip the ear pad firmly and rotate anticlockwise 1/8th turn. The
whole ear pad assembly can then be removed
n
To replace: Locate the lugs on the ear pad assembly into the headphones,
and then rotate clockwise 1/8th turn until it clicks.
Safety Standards
Easi-Headphones have been designed to meet the following standards: RoHS,
CE, EMC.
Specification
Impedance: 32ohms
Frequency response:
100 – 16kHz ±3dB
Max power rating:
30mW
Magnet:
12.5 x 1.5mm NdFeB
Output SPL
119dB at 1kHz, 1mW (IEC318)
Easi-Headphones are shipped with a
stereoaudio lead to connect between the Easi-
Headphones and your audio source. The cable
is symmetrical so it does not matter which end
is connected.
The headphone cushions can be removed
and replaced with new ones. Please note that
what is removed and replaced is the complete
earpiece assembly including the plastic clips
and the material that holds the foam on.
Easi-Headphones
