TCB-881N
ENGLISH
3
TCB-881N transceiver
Microphone with cord
Power cable
Radio mounting bracket
Radio mounting thumb screw with rubber washer
Mounting screw with washer (for transceiver bracket)
Mounting screw with washer (for microphone bracket)
Microphone mounting bracket
1 unit
1 unit
1 unit
1 unit
2 pieces
3 pieces
2 pieces
1 pieces
1. Introduction
TCB-881N transceiver is designed to have a good performance in any
conditions that the transceiver operates, using rugged build chassis, PCB’s
and components. This transceiver is also designed for users’ convenience,
implementing human ergonomics to locate the knobs and buttons in
the proper places. The combination of well designed knobs and buttons
as well as user friendly graphic layouts will lead users to quickly adapt
themselves for easy operation. The newly applied menu mode will make
professional users more satisfactory with pleasure. The elegant and luxury
blue LED light supporting the face design will go well with any vehicles.
This instruction manual has been designed to enable you to get the best
use from your CB Transceiver, therefore you are recommended to take a
few minutes to read this instruction manual before initial use of your CB
Transceiver.
2. Supplied Accessories
Your transceiver is supplied with a full range of accessories to help you to
get started and virtually benefit from all the features straight away.
3. Installation
Plan the location of the transceiver and microphone first, which is most
convenient for the operation. The transceiver should normally be mounted
horizontally, but may be mounted vertically. The bracket supplied can be
fitted above or below the case allowing the TCB-881N to be cradled by the
bracket or suspended from it.
