TCB-881N
ENGLISH
7
To set the dual watch for the first time, press this button momentarily while
you are on the current (primary) channel. The DW icon will be blinking.
Select another channel that you like to use as sub-channel (secondary
channel) during the icon’s blinking using the channel selector or quick up/
quick down selector. Press this button momentarily again to activate the
dual watch. The icon stops blinking and keeps being displayed. The dual
watch starts.
To change the dual watch channels, press the DW button during dual
watch operation. The dual watch stops.
If you press the PTT button whilst receiving a signal in dual watch mode
the transceiver will transmit on the currently displayed channel. If you
press the PTT button when no signal is present the transceiver will transmit
on the primary channel.
Emergency Scan : Press dual watch button for about two seconds. The
transceiver starts the emergency scanning. The transceiver visits the
emergency channel once in every second during this scanning. Press the
scan button to deactivate this scanning.
3) Memory Channel Selectors
Momentary press allows you to directly access the pre
-memorized channels (Memory Recall).
The LCD displays one of the memory number icons
(M1, M2, M3 and M4)
To memorize channels (Memory Store), first select the channel that you
are going to memorize and press one of the memory channel selectors for
more than 3 seconds. This will make the channel memorized and at the
same time the transceiver starts to operate on the same channel.
To return to the previous channel operation, momentary press the
memory channel selector, or use the channel selector or quick up/quick
down selector.
When you select a channel and the channel is same as one of the
memorized channels, the matching memory number icon blinks.
